S2710-52P-SI-AC huawei 48 port network switch

Product Attributes :

Feature:48*10/100Base-TX,4*1GESFP

Function:LACP, POE, QoS, SNMP, Stackable

Transmission Rate:10/100/1000Mbps

Communication Mode:Full-Duplex & Half-Duplex

Forwarding performance:13.2 Mpps

Product Description

Item	S2700-SI/S2710-SI*	S2700-EI	S2750-EI/S2751-EI
Downlink Ports	S2700-9TP-SI**/S2700-9TP-EI/S2700-9TP-PWR-EI: 8 10/100 Base-TX Ethernet ports S2700-18TP-SI/S2700-18TP-EI/S2750-20TP-PWR-EI-AC: 16 10/100 Base-TX Ethernet ports S2700-26TP-SI/S2700-26TP-EI/S2700-26TP-PWR-EI/S2750-28TP-EI-AC/S2750-28TP-PWR-EI-AC/S2751-28TP-PWR-EI-AC: 24 10/100 Base-TX Ethernet ports S2710-52P-SI/S2700-52P-EI: 48 10/100 Base-TX Ethernet ports
Uplink Ports	S2700-9TP-SI/S2700-9TP-EI/S2700-9TP-PWR-EI/: 1 dual-purpose 10/100/1,000 or SFP S2700-18TP-EI /S2700-18TP-SI /S2700-26TP-EI /S2700-26TP-EI /S2700-26TP-PWR-EI/S2700-26TP-SI: 2 dual-purpose 10/100/1,000 or SFP S2710-52P-SI/S2700-52P-EI/: 4 Gb SFP S2750-20TP-PWR-EI /S2750-28TP-EI-AC/S2750-28TP-PWR-EI/S2751-28TP-PWR-EI: 2 Gb SFP and 2 dual-purpose 10/100/1,000 or SFP
MAC Address	8 K MAC address entries Manual deletion of dynamic MAC address entries Aging time of MAC address configurable Black hole MAC address entries	8 K MAC address entries Manual deletion of dynamic MAC address entries Aging time of MAC address configurable Black hole MAC address entries MAC address learning control based on ports	16 K MAC address entries Manual deletion of dynamic MAC address entries Aging time of MAC address configurable MAC address learning control based on ports Black hole MAC address entries
VLAN Feature	4K active VLANs, complying with IEEE 802.1Q Port-based VLAN assignment
VLAN Feature	N/A	MAC address-based assignment Port-based QinQ
QoS	Outbound port-based rate limiting and flow-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1ppriorities and queues SP, WRR, and SP + WRR algorithms	Port-based rate limiting and flow-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1ppriorities and queues SP, WRR, and SP + WRR algorithms	Port-based rate limiting and flow-based rate limiting 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP + WRR algorithms
QoS	N/A		Packet-based priority remark and packet redirection
IPv6 Features	IPv6 protocol Static IPv6 routes	IPv6 protocol Static IPv6 routes Supports MLD v1/v2 snooping
Multicast	IGMP v1/v2/v3 snooping Port-based rate limiting formulticast packets	MVLAN Controllable multicast IGMP v1/v2/v3 snooping Port-based rate limiting for multicast packets
Reliability	S2700-SI: STP (IEEE 802.1d), RSTP (IEEE 802.1w) S2710-SI: STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)	STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), RRPP topology, and RRPP multi-instance	STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP topology and RRPP multi-instance SEP and ERPS (G.8032) Smart Link tree topology and Smart Link multi-instance, implementing millisecond-level protective switchover
Traffic Sampling	N/A		sFlow
Security and Access Features	S2700-SI: Storm suppression S2710-SI: Storm suppression, IP Source Guard	802.1x authentication and limit on the number of users on an interface Storm suppression IP Source Guard
Security and Access Features	S2700-SI: Multiple authentication methods including AAA, RADIUS, andTACACS+ Port isolation, multicasesuppression, broadcast, and unknown unicast packets CPU defense S2710-SI: Multiple authentication methods including AAA, RADIUS, and TACACS+ Port isolation, multicasesuppression, broadcast, and unknown unicast packets CPU defense DHCP snooping	Multiple authentication methods including AAA, RADIUS, and TACACS+ 802.1x authentication, MAC address authentication, MAC bypass authentication DHCP snooping Port isolation and sticky MAC Packet filtering based on MAC addresses Multicast suppression, broadcast, and unknown unicast packets Limit on the number of learned MAC addresses CPU defense S2750-EI/S2751-EI: DHCP relay
Surge Protection	Surge protection capability of service ports: 6 kV (1 kV on PoE switches)		Surge protection capability of service ports: 6 kV
Management	Stack (S2710-52P-SI-AC, S2710-52P-PWR-SI, S2700-52P-EI-AC, and S2700-52P-PWR-EI) Auto-config CLI-based configuration Remote configuration using Telnet SNMP v1/v2C/v3 Remote network monitoring SSHv2 Web-based device management		Stack Easy Operation CLI-based configuration Remote configuration using Telnet SNMP v1/v2C/v3 Remote network monitoring SSHv2 Web-based device management
Interoperability	NA		Supports VBST (Compatible withPVST/PVST+/RPVST)
			Supports LNP (similar to DTP)
			Supports VCMP (similar to VTP)
Operating Environment	Long-term operating temperature: 23oF to 122oF (–5°C to 50°C) Relative humidity: 10% to 90% (non-condensing)
Power	Rated AC voltage: 100V to 240V, 50/60 Hz, Maximum voltage: 90V to 264V, 50/60 Hz Rated DC voltage: –48V to –60V, Maximum voltage: –36V to –72V Note: PoE models do not use DC power supplies.
Dimensions (W x D x H)	S2700-9TP-EI/SI: 9.8 in. x 7.1 in. x 1.7 in. (250 mm × 180 mm × 43.6 mm) S2700-9TP-PWR-EI: 12.6 in. x 8.7 in. x 1.7 in. (320 mm × 220 mm × 43.6 mm) S2700-18TP-EI/SI/S2700-26TP-EI/SI/S2750-28TP-EI-AC: 17.4 in. x 8.7 in. x 1.7 in. (442 mm × 220 mm × 43.6 mm) S2700-26TP-PWR-EI: 17.4 in. x 16.5 in. x 1.7 in. (442 mm × 420 mm × 43.6 mm) S2710-52P-SI/S2700-52P-EI: 17.4 in. x 8.7 in. x 1.7 in. (442 mm × 220 mm × 43.6 mm) S2750-20TP-PWR-EI-AC/S2750-28TP-PWR-EI-AC/S2751-28TP-PWR-EI-AC/ S2720-28TP-EI-AC: 17.4 in. x 12.2 in. x 1.7 in. (442 mm × 310 mm × 43.6 mm)
Weight	S2700-9TP-SI < 3.1 lb. (1.4 kg) S2700-18TP-SI < 5.3 lb. (2.4 kg) S2700-26TP-SI < 5.3 lb. (2.4 kg) S2710-52P-SI < 6.6 lb. (3 kg)	S2700-9TP-SI < 3.1 lb. (1.4 kg) S2700-9TP-PWR-EI < 5.5 lb. (2.5 kg) S2700-18TP-EI < 5.3 lb. (2.4 kg) S2700-26TP-EI < 5.3 lb. (2.4 kg) S2700-52P-EI < 6.6 lb. (3 kg) S2700-26TP-PWR-EI < 8.8 lb. (4 kg) without power supply	S2750-20TP-PWR-EI < 9.9 lb. (4.5 kg) S2750-28TP-EI < 6.6 lb. (3 kg) S2750-28TP-PWR-EI < 9.9 lb. (4.5 kg) S2751-28TP-PWR-EI-AC < 9.9 lb. (4.5 kg)
Power Consumption	S2700-9TP-SI < 12.8W S2700-18TP-SI < 14.5W S2700-26TP-SI < 15.5W S2710-52P-SI < 38W	S2700-9TP-EI < 12.8W S2700-9TP-PWR-EI < 154W(PoE: 124W) S2700-18TP-EI < 14.5W S2700-26TP-EI < 15.5W S2700-52P-EI < 38W S2700-26TP-PWR-EI < 808W(PoE: 740W)	S2750-20TP-PWR-EI < 435W S2750-28TP-EI < 15.7W S2750-28TP-PWR-EI < 445W S2751-28TP-PWR-EI-AC < 147W S2720-28TP-EI-AC < 5.7W

Online Inquiry

Subject

Contact Person*

Email*

TEL

Message*

Verification Code*

All fields with an * are required.

S2710-52P-SI-AC huawei 48 port network switch

About Us

Info

Links