SPA-8X1GE-V2= 8-Port Gigabit Ethernet Shared Port Adapter Spare

Product Attributes :

Product Code	SPA-8X1GE-V2=
Product compatibility	Cisco 12000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) Cisco XR 12000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) Cisco ASR 1000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) Cisco CRS Carrier Routing System (5-, 8-, and 10-port GE SPAs)
Port density per SPA	2, 5, 8, or 10 Gigabit Ethernet ports Usable in combination of SFP and RJ-45 ports for a total of 2 Gigabit Ethernet ports
Physical interfaces	Short wavelength (SX) Long reach/long haul (LX/LH) Extended distance (ZX) SFP SFP-GE-T (5-, 8-, and 10-port Gigabit Ethernet SPAs) *Built-in RJ-45 (2-port Gigabit Ethernet SPA)
Reliability and availability	OIR of the SPA within the SIP and the optics within the SPA Field-replaceable SFP optical modules
Physical specifications	8-port Gigabit Ethernet SPAs: Weight: 0.75 lb (0.34 kg) Height: 0.8 in. (2.03 cm) (single height) Width: 6.75 in. (17.15 cm) Depth: 7.28 in. (18.49 cm)
Power	8-port Gigabit Ethernet SPA: 20W (with SX and LX optics); 22.3W (with ZX optics)

Product Description

SPA-8X1GE-V2= Specification
Product compatibility	• Cisco Catalyst 6500 Series Switches (2 and 10-port GE SPAs) • Cisco 7600 Series Router (2-, 5-, and 10-port GE SPAs) • Cisco 12000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) • Cisco XR 12000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) • Cisco ASR 1000 Series Router (2-, 5-, 8-, and 10-port GE SPAs) • Cisco CRS Carrier Routing System (5-, 8-, and 10-port GE SPAs) • Cisco 10000 Series Router (2 and 5-port GE SPAs)
Port density per SPA	2, 5, 8, or 10 Gigabit Ethernet ports Usable in combination of SFP and RJ-45 ports for a total of 2 Gigabit Ethernet ports
Physical interfaces	• Short wavelength (SX) • Long reach/long haul (LX/LH) • Extended distance (ZX) SFP • SFP-GE-T (5-, 8-, and 10-port Gigabit Ethernet SPAs) • Built-in RJ-45 (2-port Gigabit Ethernet SPA)
LED indicators	SPA status: Bicolor green and amber LEDs encode the SPA status as follows: • LED off: SPA is powered off • LED amber: SPA is powered on and initializing • LED green: SPA is powered on and operational In addition to the status LED, the SPAs also have a bicolor, surface-mount, right-angle LED dedicated to each port to indicate port status. The green and amber LEDs encode the port status as follows: • LED off: Port is not enabled by software • LED: Port is enabled by software, but there is a problem with the Ethernet link • LED green: Port is enabled by software, and there is a valid Ethernet link
Features and functions	• Autonegotiation • Full-duplex operation • 802.1Q VLAN termination • 802.1ad QinQ termination (stacked VLAN processing) • Jumbo Frames support (9188 bytes) • Support for command-line interface (CLI)-controlled online insertion and removal (OIR) • 802.3x flow control • Bridge protocol data unit (BPDU), Cisco Discovery Protocol, and VLAN Trunking Protocol (VTP) filtering • Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) Tunneling • Layer 2 access list (MAC address-based filtering) • Up to 8000 VLANs per SPA and subject to a limit of 4000 VLANs per port for 802.1q • Up to 5000 MAC accounting entries per SPA (source MAC accounting on the ingress, and destination MAC accounting on the egress) • Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address filtering entries per port • Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets • Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast packets • Per-port byte counters for good bytes and dropped bytes